Write us a Review
Searching...
Bob's Bicycles Fort Walton Beach, FL

Hours: 10am-6pm Tue-Sat, CLOSED MON AND SUN

Phone: 850-243-5856

Like Bob's Bicycles on Facebook Check Bob's Bicycles out on Instagram 

 
 
 
 
 
 
 
 
 
 

Refine By

Availability

Brands

Size

+ more sizes
 
> BMX Parts

BMX Parts

103 Results
Per Page 30 60
1 2 Next
Odyssey Cable Knarps
$3.99

- Sold in pairs. - Allen wrench included. [more]

Odyssey Par Ends
$3.99

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from… [more]

Odyssey Air Supply Inner Tube
$4.99

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the… [more]

Odyssey High Pressure Rim Strips
$4.99

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX… [more]

Odyssey Graduate PC Pegs - Replacement Sleeve
$5.99

Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually. [more]

Odyssey M2 Brake Cable
$5.99

Compatible cable for M2 Monolever. [more]

Sunday Seeley PC Pegs - Replacement Sleeve
$5.99

This is a replacement sleeve for Jake Seeley’s signature peg. It features a proprietary plastic blend that slides nice when you’re on the grind, and sticks when you want to stall a bit. - Aluminum Jake Seeley peg cores sold separately - Replacement sleeve sold individually [more]

Odyssey Gyro G3 Lower Cables
$7.99

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only. [more]

Odyssey Ghost Brake Pads
$8.50

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the… [more]

Odyssey Slim-By-Four Brake Pads
$8.50

The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip… [more]

Odyssey Gyro G3 Upper Cables
$8.99

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only. [more]

Odyssey Slim Seat Clamp
$8.99

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size. [more]

GSport G.L.A.N.D. MK IV Hub Guards
$9.99

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard. [more]

Odyssey Aaron Ross BOSS Signature Grips
$9.99

In addition to updating Aaron’s tire, Odyssey also wanted to update his signature grip. The updated “Boss” grip features a low profile block pattern which will match his tire, and comes in at 158mm. These will feel similar to his original grip, but improved and with all new styling. [more]

Odyssey Broc Raiford Signature Grips
$9.99

Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme. [more]

Odyssey Clutch Hub Guard
$9.99 - $22.99

- Press fit designed to work the hub's non-drive side collar. [more]

Odyssey Linear Slic Kable w/K-Shield
$9.99

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz) [more]

Odyssey Mike Aitken Grips
$9.99

Mike has wanted to do a signature grip with Odyssey for a long time. After trying out various grips over the years, he settled on the style you see above. Comfortable circular pattern with a medium feel and Mike Aitken’s approval! [more]

Odyssey Pursuit Grips
$9.99

Odyssey Pursuit grips feature a wavy horizontal ribbing and other design cues to mimic how people usually wear their grips in. A textured section at the outer end allows for a very comfortable feel overall. The flat part of the grip takes its inspiration from Odyssey's popular Pursuit tire tread… [more]

Odyssey Tom Dugan Grips
$9.99

Tom Dugan’s signature grip features a timeless coil pattern, along with a feather design across the heavy wear areas. By using two molds you’ll notice feather angle symmetry once they’re installed. Par Ends included. [more]

Sunday Jake Seeley Signature Grips
$9.99

The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort. [more]

WeThePeople Arrow 115 Grips
$9.99

WeThePeople's Arrow 115 Grips have the perfect texture and density to give you new confidence while railing it on the bike. Material: VEX rubber compound Rubber durometer: 30° Size: 115mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends [more]

WeThePeople Arrow 146 Grips
$9.99

WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends [more]

WeThePeople Raptor Grips
$9.99

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter •… [more]

Odyssey Springfield Lever
$10.99

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to… [more]

WeThePeople 7000 Top Cap
$12.99

Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs) [more]

Odyssey Adjustable Quik Slic Kable
$13.99

As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES -… [more]

Odyssey Twisted PC Pedals
$13.99 - $19.99

One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite [more]

WeThePeople Drops Bar Caps
$13.99

WeThePeople's Drops Bar Caps protect your barends and grips from damage when you have to bail on a less-than-perfect trick. The lightweight, CNC'ed aluminum caps bolt to your bars and keep things from getting scraped up when the bike hits the ground. • 6061-T6 aluminum [more]

GSport Uniguard Hub Guard
$14.99

The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?. [more]

Odyssey Bluebird Chain
$14.99

For our Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically… [more]

Odyssey Wrenches Tripod Seat
$15.00

Odyssey's Wrenches seat will now be available in a Tripod version in this nice distressed black material with nice debossing. This version will have a little more padding than the current Principal version. [more]

Odyssey Springfield Brakes
$17.99

One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the… [more]

Odyssey Tie-Dye Twisted PC Pedals
$17.99

One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. - Often duplicated but never replicated. - 9/16-inch pedal threads - High-strength plastic composite. [more]

Odyssey Graduate PC Peg
$18.99

Odyssey's newest peg! The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5? (length) x 1.5? (outer diameter) - 4.5 oz (9 oz for a pair) [more]

GSport Simian Hub Guard
$19.99

Designed specifically for use with the Simian Front Hub. TECHNICAL SPECIFICATIONS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life [more]

Odyssey Grandstand PC Pedals
$19.99

The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big… [more]

Odyssey Gyro G3
$19.99

Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included. [more]

Odyssey HGS Spokes
$19.99

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX. [more]

Odyssey Monolever
$19.99

The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options. [more]

Odyssey R/F Series Pre-Load Bolt
$19.99

This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down. [more]

Odyssey Retro Seat
$20.00

In addition to the anniversary sprocket, Odyssey also offers these retro seats that will coincide/match with their collaboration with Vans. [more]

Odyssey Mid Bottom Bracket
$22.99 - $24.99

- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included. [more]

WeThePeople Supreme Bar Ends
$23.99

Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the… [more]

Odyssey M2 Monolever
$24.99

The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users. - Right hand only (works flipped on the left) - M2 specific upper cable and single cable coupler included. [more]

Odyssey Pro Headset
$24.99

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8… [more]

Odyssey Pro Headset (Conical)
$24.99

New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality… [more]

Odyssey Quartet Hub Guard
$24.99

Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life [more]

Odyssey Pivotal Seat Post
$25.99 - $29.99

It’s a traditional straight up pivotal design with a 200mm length. [more]

Odyssey Tom Dugan Tires
$25.99 - $34.99

Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways. [more]

Odyssey Tripod Post
$25.99

Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined [more]

Odyssey Aaron Ross V2 Tires
$26.99

Aaron’s signature tires feature an updated block tread and bigger sizing. The uniform block tread is reminiscent of his original tire, but freshened up. Coming in at 20x2.30" and 20x2.40" [more]

WeThePeople Tripod Seat Post
$26.99

WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up… [more]

Odyssey Tom Dugan Tripod Seat
$27.99

Here’s Odyssey's Tom Dugan signature Tripod seat. Odyssey worked with Tom to produce a simple slim seat design to his exact specifications. The debossed pattern on this seat even references the actual seat on his Honda motorcycle, which is a nice touch. [more]

Odyssey Hawk Military Vintage Seat
$29.99

Chase is a fan of slim seats, so that is exactly what Odyssey worked with him on. The seat features a microfiber material with debossed branding along with gold inlays reminiscent of old BMX seats. Constructed from re-purposed vintage military canvas which Odyssey sourced from downtown Los Angeles.… [more]

Odyssey Hawk Tripod Seat
$29.99

Chase is a fan of slim seats, so that is exactly what Odyssey worked with him on. The seat features a microfiber material with debossed branding along with gold inlays reminiscent of old BMX seats. [more]

Odyssey Mike Aitken Pivotal Seat
$29.99

Mike Aitken's original signature seat size and shape. [more]

Odyssey Monogram FAT CAPITAL Pivotal Seat
$29.99

Back by popular demand here’s the Fat Capital version of Odyssey' s Monogram saddle. It comes in a suede material with Odyssey's debossed Monogram logo and “Built To Last” slogan. [more]

Odyssey Springfield Brake Kit
$29.99

The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium… [more]

Sunday Freeze Topload Stem
$29.99

Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer… [more]

103 Results
Per Page 30 60
1 2 Next