Write us a Review
Searching...
Bob's Bicycles Fort Walton Beach, FL

Hours: 10-6 Tue-Sat CLOSED MON AND SUN

Phone: 850-243-5856

Like Bob's Bicycles on Facebook Check Bob's Bicycles out on Instagram 

 
 
 
 
 
 
 
 
 
 

Refine By

Brands

+ more brands

Consumer Reviews

Price

–   GO

Size

 
> Pedals

Pedals

24 Results
Crank Brothers Candy 1
$53.99 - $350.00
$59.99 - $350.00

Crank Brothers' Candy 1 pedals combine 4-sided cages for super-easy entry/exit with one-piece composite platforms for foot support and stability. The Candy 1s feature chromoly axles, steel wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. [more]

Crank Brothers Eggbeater 3
$117.00 - $129.99
$129.99

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 3s boast forged chromoly axles, stainless-steel springs, cast steel bodies and wings, and… [more]

iSSi Trail III Pedal
$120.00 - $130.00

iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals… [more]

Crank Brothers 5050 3
$125.00

Crank Brothers steps up to the plate to provide downhillers, freeriders and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050 3s have removable plates so you have full… [more]

Spank Oozy Trail Pedals
$129.00

You can't conquer the trails without power and control. Thankfully, Spank's Oozy Trail pedals give you a rock-solid platform to power all of your off-road exploits. • Cold Forged Alloy Pedal Body • Hollow Taper Scandium Enriched Steel Axle • 12mm Thin - Massive 11x11cm Platform • 360g per pair… [more]

Xpedo GFX Pedals
$129.00

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the… [more]

Chromag Contact Pedals
$130.00

Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and… [more]

Crank Brothers Candy 3
$130.00

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud… [more]

Crank Brothers Mallet 3
$135.00
Product Rating
 
5.0 stars
 (1 Review)

Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free… [more]

Garmin Vector to Vector 2 Upgrade Kit
$149.99

Upgrade your Vector pedal-based power meter to the dual-sensing Vector 2 system. Garmin's Vector to Vector 2 Upgrade Kit can accommodate both standard (12-15 mm) and large (15-18 mm) crank arms. Upgrading allows you to take that next step in performance by measuring the power from both legs, which… [more]

Shimano 105 SPD-SL Pedals
$149.99
Product Rating
 
3.0 stars
 (3 Reviews)

With Shimano's 105 SPD-SL Pedals, you get pro-level features without the price tag. They sport extra-wide platforms with stainless-steel plates for easy and smooth entry and exit, and excellent pedaling efficiency. Inside, there are sealed cartridge bearings for minimal friction and long-term… [more]

Crank Brothers Mallet DH/Race
$150.00
Product Rating
 
5.0 stars
 (2 Reviews)

Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver… [more]

Crank Brothers Stamp Pedals
$150.00

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the… [more]

Chromag Scarab Platform Pedals
$160.00

At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center.… [more]

45NRTH Helva
$165.00

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning… [more]

Crank Brothers Candy 7 Pedals
$165.00

A pedal sweet enough to make XC racers drool, the Crank Brothers Candy 7 is the full-performance package. This competition-ready chromoly spindled mountain pedal is customizable, and features integrated traction pad technology to refine fit, feel, and power transfer. A ribbed body helps provide… [more]

Crank Brothers Mallet E Pedals
$165.00

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps… [more]

Crank Brothers Titanium Spindle Kit
$165.00

The ultimate weight-saving upgrade.  - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with:… [more]

Xpedo Thrust SL Cr Pedals
$169.00

- Weight: 210g CrMo - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge  - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed) [more]

DMR Vault Pedals
$179.90 - $199.90

- Gigantic, lightweight aluminum platform with concave foot bed - High load DU bushing and cartridge bearing - Included Flip Pins are blue. Silver, black, red, or gold pins are sold separately - DM-1837 Brendog Brendan Fairclough signature model, murdered - 105x115x17mm [more]

Race Face Atlas Platform Pedal
$179.99

• Low-profile, lightweight, wide aluminum body with double-concave platform. • Platform size: 101x114cm • 4 Full sealed cartridge bearings per pedal • Super thin double concave wide platform • Hex-head threaded pin design offers more bite for added security • Fore and aft angled bottom-loading pins… [more]

Shimano PD-M9000 XTR Pedals
$179.99

• Wide pedal-to-shoe contact area • Wider bearing placement for increased rigidity • Slimmer, lighter axle • Low platform height for pedaling stability • Lightweight: 310g pair • Oval shape axle body housing for smoother mud & debris flow • Slimmer axle unit increases open space between bindings •… [more]

Xpedo Baldwin Ti Pedals
$189.00

The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium -… [more]

Xpedo M-Force 8 Cr Pedals
$189.00

- Weight: 260g  - Body: Titanium  - Spindle: Cromoly  - Bearings: 3 Cartridge  - Springs: SWP  - Cleat: XPEDO XPT (6° Float)  [more]

24 Results